Zanco Journal of Medical Sciences
Skip Navigation Links
Available Issues
Editorial Board
Information for Authors
Review Process
Links and Contacts
  Zanko J Med Sci:  Aug. 2017; 21 (2): 1796-1806

Evaluation of some properties of heat curing denture base materials cured by different curing techniques

Twana Omer Bakr*, Rizgar Mohammed Ameen Hasan*

* Department of Prosthodontics, College of Dentistry, Hawler Medical University, Erbil, Iraq.


Background and objective: Dry pressure curing device is one of the devices used in curing of acrylic resin denture bases. This study aimed to evaluate some properties of acrylic resins, cured by three different techniques.

Methods: Two hundred and fifty two specimens were prepared from two brands of heat curing acrylic resin (Paladent20 and Major). The specimens were cured by three techniques (dry heat pressure curing, conventional curing and microwave irradiation). For each curing technique, seven specimens were prepared and some mechanical and physical properties were tested.

Results: Less residual monomer showed in the dry heat pressure curing of Paladent 20 acrylic resin. The conventional curing of Major acrylic resin has shown the least porosity. The highest bending strength and less water sorption showed by microwave irradiation of Major acrylic resin specimens.

Conclusion: Some properties of the specimens cured by the dry heat pressure curing device were better than other curing techniques. The microwave irradiation has some good properties when compared with other techniques. The Paladent 20 brand of acrylic resin showed better properties than the Major acrylic resin.

Keywords: Dry pressure curing device; Denture base materials; Curing techniques;             Properties.


1. Craig R, Powers J. Restorative Dental materials.11th ed. St Louis; 2002. P. 635-89.

2. Craig RG .Restorative Dental Materials. Philadelphia, Pa: Saunders; 1993. P. 478.

3. Rahal JS, Mesquita MF, Henriques GE, Nobilo MA. Surface roughness of acrylic resins submitted to mechanical and chemical polishing. J Oral Rehabil 2004; 31:1075–9.

4. Phoenix RD. Denture base resins. In: Anusavice K. Phillips’ science of dental materials. 11th ed. China: Saunders Elsevier; 2003. P. 721-57.

5. Vallittu PK, Ruyter IE, Buykuilmaz S. Effect of polymerization temperature and time on the residual monomer content of denture base polymers.Eur J Oral Sci 1998; 106:588-93.

6. Compagnoni MA, Barbosa DB, de Souza RF, Pero AC. The effect of polymerization cycles on porosity of microwave-processed denture base resin. J Prosthet Dent 2004; 91(3): 281–5.

7. Schneider RL, Curtis ER, Clancy JMS. Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base.J Prosthet Dent 2002; 88: 145-50.

8. Schibayama R, GennariFilho H, Mazaro JVK, Vedovatto E, Assunclo WG. Effect of flasking and polymerization techniques on tooth movement in complete denture processing. J Prosthodont 2009; 18(3): 250-64.

9. Arora S, Khindria S, Garg S, Mittal S. Comparative Evaluation of Linear Dimensional Changes of Four Commercially Available Heat Cure Acrylic Resins. Indian J Dent Sci 2011; 4(3): 133-80.

10. Unalan F, Dikbas I, Gurbuz O. Transverse strength of polymethylmethacryltate reinforced with different forms and concentrations of E-glass fibers. OHDMBSC 2010; IX (3):134-76.

11. Pero ACMarra JPaleari AGde Souza RFRuvolo-Filho ACompagnoni MA. Reliability of a method for evaluating porosity in denture base resins. Gerodontology 2011; 28(2):127-33.

12. Anusavice K. Philip’s science of dental materials. 11th ed. Philadlphia: WB Sauders; 1996. P.143-69

13. Takashi A, Hiroshi M, Taizo H. Properties of highly cross-linked autopolymerizing reline acrylic resins. J Prosthet Dent 1995; 73: 55-9.

14. Al-Nori, Ali AA, Rajab LT. Water sorption of heat-cured acrylic resin.Al-Rafidain Dent J 2007; 7(2): 186-94.

15. Jorge JH, Giampaolo ET, Machado AL, Vergani CE. Cytotoxicity of denture base acrylic resin. J Appl Oral Sci 2003; 14(3):190-3.

16. Dogan A, Bek B, Cevik N, Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent 1995; 23: 313–8.

17. Harrison A, Huggett R. Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers.J Dent 1992; 20:370-4.

18. Habib SH. The effect of microwave post-poymerization treatment on some properties of cold cured and visible light-cured acrylic resin materials. M. Sc. Thesis, College of Dentistry, Hawler Medical University; 2011.

19. Hassan AL-Bahar ZJ. Evaluation the Effect of Incorporated Hydroxyapatite Prepared from Dried Egg Shell on Some Properties of Relined Denture Base. M.Sc thesis, Mosul University; 2011.

20. John C, Eugene P. Porosity reduction and its associated effect on the diametral tensile strength of activated acrylic resins. J Prosthet Dent 1985; 53(3): 374–9.

21. Lai CP, Tsaia MH, Chena M, Chang HS, Tayb HH.Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath. Dent Mater 2004; 20: 133–41.

22. Mohamed SH, Al-JadiAM, Ajaal T. Using of HPLC Analysis for Evaluation of Residual Monomer Content in Denture Base Material and Their Effect on Mechanical Properties. Journal of Physical Science 2008; 19(2): 127–35.

Slightly know the replica watches uk fashionable women, even if you do not understand the replica watches also know that Cartier tanks, after all, this is the rolex replica royal family, film stars, literary celebrities, and rolex replica uk even political places are wearing watches.